When cisco IOS runs for first time or after reset default time and date needs to be set correct. You can to this manually or with synchronization. In this topic we will talk about synchronization with Network Time Protocol (NTP). for this you need first time choose NTP server and know it's IP address, you can find it here - https://tf.nist.gov/tf-cgi/servers.cgi after this go to cisco terminal and enter following commands: 1. Cisco# configure terminal 2. Cisco(config)# ntp server <NTP server IP address> after this you can verify how it works with commands: Cisco# ntp status Cisco# ntp associations After every configuration change don't forger write config.
On this Blog You can read mini solutions from Tech World and not only...